P-135 Lens Port


The AQUATECH P-135 Lens Port is designed for the Sony 24-70mm f/4 ZA & 24-70mm f/2.8 GM zoom lens (will require the correct Lens Gears). If using the 24-70mm f/2.8 GM this port will also require the P-30 EX Extension ring.

This port is made up of a 50mm extension ring (P-50EX) and a front port section to accommodate the zoom range of the lens. These parts of the port can also be used as an extension ring to combine with Dome Ports, and the front section can be used with other short length prime lenses making it a very versatile combination.

AQUATECH Lens Ports feature a threaded system that is interchangeable with all AQUATECH Water Housings. No tools are required to attach or remove the port. The Element is also replaceable if damaged (repairs will need to be performed by an AQUATECH Service center).

*Please note that this product will only work with the Edge, Reflex, Evo, Elite, Compac, Base & Delphin models.  

Key Features:

    - Optically correct acrylic element

    - Mechanically sealed, no adhesives used

    - Element replaceable


Dimensions (DxL): 190mm x 118mm 

Weight: 1.80lbs (820g)

Material:  Acrylic element, aluminum base

To determine the port you need please click here

    Out of Stock

    Customer Reviews

    Based on 1 review
    Mills James
    The lens port seems to be extremely soft and tiny scratches will show up no matter how careful I ...

    Overall very poor. The body housing had little flecks of plastic from the moulding process that came off and were sitting on the o ring ready to cause a leak, the sync housing that cost nearly $700 is poorly designed and barely fits the transmitter and is massively over priced. Gear that was not QC'd properly out of the box I had to pay to send back. There are few/poor instructions on how everything fits together eg how do I stop my camera sliding around inside the housing? I'm seriously considering sending everything back and look at alternatives.